Fits the MM Panhard Bar kit for the 1979-2004 Mustang.
NOTE about Panhard Bar generations!
Two generations of our Panhard rods cover the 1979-2004 model years of Mustang chassis. To send you the correct replacement, we need to know which generation Panhard rod you have.
We know it’s confusing; the two generations of MM Panhard rods don’t match up with the Mustang chassis generations. Our Panhard rods fall into either the “current” generation or our “first” generation. If you bought your Panhard bar kit after 2005 you have the current generation rod; just click the Add To Cart button.
If you bought your Panhard bar kit before 2005, please inspect it to determine whether your rod is first generation or current generation. Here’s how:
1) Measure the aluminum rod length.
2) Measure the diameter of the bolt threads that pass through the spherical rod-end at the chassis mount. This is the easiest one to measure. It will be either 3/4” or 5/8”. Tip: use an open-end wrench as a caliper on the exposed threads.
3) Check the specs below to see what generation your Panhard bar is from.
First generation:
- 35.5 in. long
- The spherical rod-end attachment bolts may be either 5/8-in. or 3/4-in. diameter.
Current generation:
- 34.0 in. long
- The spherical rod-end attachment bolts are 5/8-in. diameter.
Current-generation rod? Order by clicking the Add To Cart button above.
First-generation rod? Order by calling us at 805-544-8748 (9-3 Pacific). Please be prepared with your Panhard rod length and the diameter of your spherical rod-end bolts.