Kit to install easily-removable door bars on a previously-installed MM 4-point roll bar. MM's E-Z-Remove door bars can be detached and removed in moments.

Fits
These previously installed MM 4-point roll bars:

• Mm5RB-20.1
• Mm5RB-20.2
• Mm5RB-20.3

Benefits

• Adds door bars to the MM 4-point roll bar already in your Mustang.
• The standard door bars of the MM 6-point roll bars can be difficult and time-consuming to remove and reinstall. When removed, bolt holes in the floor are exposed.
• After retrofitting to the E-Z-Remove door bars, both door bars can be easily removed in just a couple of minutes, and there are no holes left exposed in the floor.
• Leave the E-Z-Remove door bars out for daily driving.
• When heading to the track, reinstall them in moments.
• Meets the NHRA and NMRA rules for removable door bars.

This kit includes:

• (2) E-Z-Remove door bars
• (2) floor mounts unique to the E-Z-Remove door bars
• (2) floor-mount doubler plates
• (2) mounting spuds for the main hoop
• All hardware required

Notes

• Welding is required. The two mounting spuds must be welded to the main hoop. No other welding is needed.
• The Mm5RB-20.2 4-point roll bar will meet the NHRA/NMRA rules with the addition of the Mm5RBO-3 E-Z-Remove door bars.
• E-Z-Remove door bars are available on new roll bars: Mm5RB-24, Mm5RB-24.5, Mm5RB-24.6
• To upgrade your 6-point roll bar to E-Z-Remove door bars use Mm5RBO-2.
• Read the Mm5RBO-3 door bar installation instructions before purchasing.