** No Longer Available **
The MM Front Swaybar is primarily designed for applications where the car has stiff coilover springs at both ends of the car, but
must use a stock style rear swaybar, which is not very stiff. With that combination of parts, the car will have balanced handling and moderate body roll. It is also a good choice for a street/drag race car which needs a front swaybar to be driven safely on the street, while adding minimal weight when used at the strip. It weighs 4lbs less than a stock 1.125" solid swaybar.
If the car has a stock 1.30" or larger front swaybar, in most cases this should be retained and a stiffer adjustable rear swaybar added to the car, to keep body roll low and handling balanced. This is especially the preferred setup when sticky 255 or larger tires are used on the car.
Note: Does NOT fit 1984-1986 SVO Mustang.
Street/Strip Mustangs
The MM Front Swaybar also works great for street/strip Mustangs:
- Less weight
- Lower rate improves rear tire forward traction on cars with a solid rear axle. Less front roll stiffness results in less driveshaft torque jacking of the rear tires' loads. More equal side-to-side rear tire loads equals more forward grip from the tire pair.
- Allows a front swaybar to ensure good street manners.
Light-weight tubular design. Powdercoated black. Mounts in the same manner as a stock swaybar. Requires 1.125" (1-1/8") swaybar pivot bushings. High-performance endlinks are recommended.
Requires
Options
Click on the option buttons above to purchase:
- Urethane pivot bushings to fit stock Fox mounting brackets.
- Stock-length endlinks to fit Mustangs with K-members having stock geometry that are also at stock to moderately lowered ride height.
- Short endlinks to fit Mustangs with the MM K-member and its altered geometry, or a Mustang with extreme lowering.
- Universal front swaybar mounts to fit the MM Front Swaybar Relocation kit.
Note
The MMFSB-2 swaybar is not the same as our discontinued MMFSB-1 (1.125" diameter by .188" wall). It's approximately 11% stiffer than the MMFSB-1 and 37% softer than a stock 1.30" swaybar.
Related Products